Suzuki GSX1400FE CHASSIS REMOVAL AND INSTALLATION

download
REMOVAL SEAT Remove the seat with the ignition key. FRAM COVERS Remove the seat. (*Above) Remove the frame cover mounting secrews (left and right sides). Remove the frame covers by pulling on the hooked parts. PILLION RIDER HANDLE Remove the pillion rider handle by removing the pillion rider handle mounting bolts. SEAT TAIL COVER Remove the seat. (*Above) Remove the pillion rider handle. (*Above) Remove the seat tail cover mounting screws. : hooked part 6-4 CHASSIS Remove the fasteners.(*6-5) Disconnect the seat lock cable A. Disconnect the brake light/taillight lead wire coupler. Remove the seat tail cover. REMOUNTING Remount the seat, frame covers, pillion rider handle and seat tail cover in the reverse order of removal. www.GSX1400FE.co.uk
CHASSIS 6-5 FASTENER REMOVAL AND REINSTALLATION FASTENER REMOVAL Depress the head of fasteners center piece 1. Pull out the fastener. INSTALLATION Let the center piece stick out toward the head so that the pawls 2 close. Insert the fastener into the installation hole. NOTE: To prevent the pawl 2 from damage, insert the fastener all the way into the installation hole. Push in the head of center piece until it becomes flush with the fastener outside face.